Difference between revisions of "Ghpsdr3-usb"
(Created page with "'''Goal is a complete easy to configure suite of ghpsdr3-alex application on a bootable USB Flash drive''' Details to follow!") |
|||
| Line 1: | Line 1: | ||
'''Goal is a complete easy to configure suite of ghpsdr3-alex application on a bootable USB Flash drive''' | '''Goal is a complete easy to configure suite of ghpsdr3-alex application on a bootable USB Flash drive''' | ||
| − | + | ===Ghpsdr3-usb-boot=== | |
| + | Very basic Instructions. I will add details as time allows. | ||
| + | |||
| + | You will need about 5GB of free space on your PC. You can delete the file and reclaim this space when you are finished.] | ||
| + | You will need a 4GB or larger USB flashdrive or stick. | ||
| + | |||
| + | |||
| + | Step 1 | ||
| + | Download the zipped Image file '''sdr_lubuntu_2011-12-21.img.zip''' from Sourceforge. The download is ~ 670MB.] | ||
| + | Download: https://sourceforge.net/projects/ghpsdr3-usb/files/2011-12-21/] | ||
| + | |||
| + | Step 2 | ||
| + | Unzip the image file sdr_lubuntu.img (3.8GB)] | ||
| + | |||
| + | Step 3 | ||
| + | Follow the instruction on this fine page for your OS substituting sdr_lubuntu.img for the ubuntu .img file. Skip the part about MD5.] | ||
| + | https://help.ubuntu.com/community/Installation/FromImgFiles] | ||
| + | |||
| + | Step 4 | ||
| + | You should now have a bootable USB Flashdrive.] | ||
| + | Plug into your booting candidate and boot from USB. | ||
| + | |||
| + | Step 5 | ||
| + | Play with your new Linux Lubuntu OS. Remeber it does have a '''SLOW''' USB drive for a disk so don't expect too much for speed. Once an app loads however it should perform FB.] | ||
| + | Your user name is sdr and the password is sdr] | ||
| + | Wired Ethernet should just work. WiFi can be configure from the little Network Manager applet located in the lower right] | ||
| + | Plug in your sound card and hook up your softrock. | ||
| + | |||
| + | Icons will be on the desktop. | ||
| + | *double click dspserver.conf, update your info save and close. | ||
| + | *double click softrock-config, answer questions and next, next .... | ||
| + | *double click softrock_start | ||
| + | *doubleclick dspserver_start | ||
| + | |||
| + | If all is well you should be able to connect to your Ghpsdr3-usb-boot PC with QtRadio! | ||
| + | To find out Ghpsdr3-usb-boot IP double click LxTerminal and enter ifconfig at the prompt. In amongst the output you should find the IP | ||
| + | |||
| + | ""Ghpsdr3-usb-boot has the features below"" | ||
| + | * Jack installed | ||
| + | * Pulse installed | ||
| + | * WidgetControl.py installed | ||
| + | * A dialog script to help you create softrock and dspserver startup scripts | ||
| + | * ssh server | ||
| + | * x11vnc server | ||
| + | * samba server | ||
Revision as of 23:14, 21 December 2011
Goal is a complete easy to configure suite of ghpsdr3-alex application on a bootable USB Flash drive
Ghpsdr3-usb-boot
Very basic Instructions. I will add details as time allows.
You will need about 5GB of free space on your PC. You can delete the file and reclaim this space when you are finished.] You will need a 4GB or larger USB flashdrive or stick.
Step 1
Download the zipped Image file sdr_lubuntu_2011-12-21.img.zip from Sourceforge. The download is ~ 670MB.]
Download: https://sourceforge.net/projects/ghpsdr3-usb/files/2011-12-21/]
Step 2 Unzip the image file sdr_lubuntu.img (3.8GB)]
Step 3 Follow the instruction on this fine page for your OS substituting sdr_lubuntu.img for the ubuntu .img file. Skip the part about MD5.] https://help.ubuntu.com/community/Installation/FromImgFiles]
Step 4 You should now have a bootable USB Flashdrive.] Plug into your booting candidate and boot from USB.
Step 5 Play with your new Linux Lubuntu OS. Remeber it does have a SLOW USB drive for a disk so don't expect too much for speed. Once an app loads however it should perform FB.] Your user name is sdr and the password is sdr] Wired Ethernet should just work. WiFi can be configure from the little Network Manager applet located in the lower right] Plug in your sound card and hook up your softrock.
Icons will be on the desktop.
- double click dspserver.conf, update your info save and close.
- double click softrock-config, answer questions and next, next ....
- double click softrock_start
- doubleclick dspserver_start
If all is well you should be able to connect to your Ghpsdr3-usb-boot PC with QtRadio! To find out Ghpsdr3-usb-boot IP double click LxTerminal and enter ifconfig at the prompt. In amongst the output you should find the IP
""Ghpsdr3-usb-boot has the features below""
- Jack installed
- Pulse installed
- WidgetControl.py installed
- A dialog script to help you create softrock and dspserver startup scripts
- ssh server
- x11vnc server
- samba server
