What's New

From Ghpsdr3 SDR project
Revision as of 11:58, 26 November 2012 by Alexlee188 (Talk | contribs) (→‎Nov 20 2012)

Jump to: navigation, search

Nov 26 2012

glSDR version 28 is in Google Play and is also available for download.

http://code.google.com/p/sdr-widget/downloads/detail?name=glSDR28.apk&can=2&q=

Nov 20 2012

glSDR version 27 is in Google Play and is also available for download. It has been tweaked to support Adreno GPU based devices.

Nov 18 2012

glSDR version 25 is in Google Play. Servers list is now updated on each SERVERS MENU invocation. Default frequency for each band is saved on exit in master mode. Band specific default frequencies can be reset to factory default via the BAND MENU.

Oct 20 2012

glSDR version 21 is in Google Play. Slave tracks freq, mode and (fake) filter settings of master. Master/slave status is displayed in Title bar.

http://code.google.com/p/sdr-widget/downloads/detail?name=glSDR21.apk&can=2&q=

Oct 17 2012

glSDR version with waterfall disabled. It may work with Adreno gpu based devices.

http://code.google.com/p/sdr-widget/downloads/detail?name=glSDR_no_waterfall.apk&can=2&q=

Sep 24 2012

Sep 24 2012 glSDR version 16 is in Play Store. You can also download here: http://code.google.com/p/sdr-widget/downloads/detail?name=glSDR16.apk&can=2&q=

Sep 22 2012

Online dspserver Server Map Thanks Andrea! http://www.montefusco.com/gmap/map.html

Sep 20 2012

glSDR version 12 is in Play Store. You can also download here:

http://code.google.com/p/sdr-widget/downloads/detail?name=glSDR12.apk&can=2&q=

It has an 80khz FM filter for listening to FM broadcasts and also options for Spectrum Averaging.

Sep 17 2012

Added direct support in QtRadio (linux) for the Griffin Powermate Vfo knob. Pushing the knob cycles through vfo step size.

Sep 15 2012

Codec2 has been updated to the latest developmental branch. This branch can be downloaded:

svn co https://freetel.svn.sourceforge.net/svnroot/freetel/codec2-dev codec2-dev

This has a new API and it has updated codec2, including a new 3200 bps codec which gives better quality than the 2400 bps codec we have used in the past.

Both master and opengl-qt5 branches have been updated with the new codec2. You need to download the codec2-dev branch above, rebuild codec2, and then rebuild dspserver and QtRadio.

Sep 14 2012

glSDR version 10 is in Play Store, For those without access to Play, you can download from: http://code.google.com/p/sdr-widget/downloads/detail?name=glSDR10.apk&can=2&q=

Sep 12 2012

The zoom feature has been ported to glSDR. Ver 9 is now in Play store. For those without access to Play store, you can download the apk here:

http://code.google.com/p/sdr-widget/downloads/detail?name=glSDR9.apk&can=2&q=

With the recent changes, high bandwidth rigs are now adequately supported by ghpsdr3-alex. You can zoom in and out to spectrum/waterfall up to 960 ksps and beyond.

Note that Glenn has also compiled a Windows binary of QtRadio that has the zoom feature and other updates to allow you to access rigs such as HiQSDR and Perseus. allowing you to set Pre-selector, attentuator etc.

Sep 10 2012

The LO_offset mechanism has been revamped. The rotation of the spectrum data is now done entirely in dspserver. Therefore clients eg. QtRadio, glSDR, do not have to rotate the data anymore.

This is needed to support the new zoom feature. You can now zoom the spectrum/waterfall on the fly. This feature is very useful for looking closely at a signal, eg 50Hz CW for you to tune spot on, and also for very wide bandwidth hardware such as Peuseus and HiQSDR. We now have servers running 500 ksps or even 960 ksps.

Checkout these videos:

http://code.google.com/p/sdr-widget/downloads/detail?name=g3vbv.ogv&can=2&q=

http://code.google.com/p/sdr-widget/downloads/detail?name=g3vbv2.ogv&can=2&q=

It will take a while for all dspservers to be updated to the lastest code and you must use the latest QtRadio and glSDR (ver 8 or later) for the new LO_offset.

Sep 5 2012

Just to summarise the status of support of the just released Qt5 Beta1 for building QtRadio under Linux:

1. You download and install the Qt5 Beta:

http://releases.qt-project.org/qt5.0/beta1/

2. You set the path to point to the qmake you want to use:

$ export PATH=/where/the/Qt/bin/dir/is:$PATH

(For example, mine is:

export PATH=/home/alex/Qt5.0.0beta1/Desktop/Qt/5.0.0-beta1/gcc_64/bin:$PATH

)

3. You can check which version of Qt is active by:

$ qmake --version

(For example, mine is:

alex@alex-Aspire-4750:~/ghpsdr3-alex$ qmake --version QMake version 2.01a Using Qt version 5.0.0 in /home/alex/Qt5.0.0beta1/Desktop/Qt/5.0.0-beta1/gcc_64/lib

)

4. The master branch now has conditional compile for Qt5 Beta and for older versions of Qt. Once the above PATH is set for the version of Qt you want, you can just use the usual automake steps to build.

5. The opengl-qt5 branch is customised for qt5 Beta ONLY. You also need to have a video card/ video chip in your PC that is opengl 2.0 compatible for it to compile and run.

Aug 3 2012

glSDR updated to version 6. This has Rx IQ Correction setting in the DSP tab. You should enable it only when connecting to servers running IQ based hardware (eg Softrock, UHFSDR), but NOT direct sampling rigs (eg Perseus).

July 3 2012

Experimental version of glSDR (version 5) that has Tx capabilities. Will only work in certain devices capable of 8khz microphone audio recording and fast CPU at the moment. Go to MENU > Tx to enable tx. Will only work with servers allowing anyone to Tx. http://code.google.com/p/sdr-widget/downloads/detail?name=glSDR.apk&can=2&q=

May 30 2012

The opengl ES 2.0 enabled version of the Android client has been uploaded to Google Play store and can be downloaded to compatible Android devices. The name of the App is glSDR.

May 28 2012

Tx audio encoding now has two available codecs: aLaw and Codec2. aLaw uses higher LAN bandwidth but the audio quality is much better than Codec2. aLaw is also suitable for digital mode Tx using the fldigi front-end connected to QtRadio. The Tx code is available in both the master and the opengl-qt5 branches.

May 19 2012

Qt5 has the bug fix for pull mode audio in Qt. The master branch and the opengl-qt5 branch can be built with the latest Qt5 (BETA) daily snapshot and the audio in pull mode works very well with Ubuntu 12.04 where most users had problems.

May 12 2012

Experimental support for RTL-SDR available.

Apr 11 2012

  • The branch audio-testing was created for linux users who were having trouble with Qt's lack of sound in QtRadio. It seemed to be more of a problem with newer 64 bit installs. audio-testing bypasses QT for audio playback and calls pulse audio libs directly. You may have to direct sound to your proper sound device with pavucontrol.

Apr 5 2012

  • Created an article on the Utilities & Add-ons page called: "Full featured recording script" unsing sox and rigctl (hamlib).

Apr 4 2012

  • A new branch, opengl, has working QtRadio code that uses OpenGL shaders to compute and display the waterfall. The waterfall is actually a 3-D cube and you can pan/zoom with mouse drags on the waterfall display. Drag it all the way to one side and you can have a glimpse of the sides of the cube. The aim of this QtRadio is to offload work from the cpu to the gpu. If your system has a weak cpu (eg atom) and a powerful gpu (eg nvidia ION) it should reduce the cpu util significantly.

Mar 18 2012

  • A new build for windows from the new protocol-3 branch is available at: http://napan.com/ve9gj/qtradio-protocol-3.zip (Built Mar 18 2012). This uses the new protocol-3 and should be able to connect with master and protocol-3 servers. Still experimental. It contains improvements to the spectrum and waterfall refresh rates for remote connections.

Feb 25 2012

Feb 19 2012

  • Graeme ZL2APV has coded CW receive in QtRadio to behave the same as Kenwood, Yaesu, K3 etc.

Feb 18 2012

Feb 17 2012

  • Bugfix to possible segfault in dspserver

Feb 16 2012

Feb 11 2012

  • The android client AHPSDR now has a Server list feature just like QtRadio. Look under the menu item Servers and select from among the active servers Download information on the AHPSDR page
  • The branch to use for most users is now the master branch. This is the one that most dspservers are running
  • Fixed SetTXAMCarrierLevel bug when tx ="all" in master branch
  • Two key Rx audio functions into their own QThread in QtRadio. This should help lower spec'd PCs
  • Fixed a bug where the band edge line in the spectrum display was off by the offset value of the dspserver.
Retrieved from "http://napan.ca/ghpsdr3/index.php?title=What%27s_New&oldid=624"